• Releases

    3CX Produkt Veröffentlichungen

extension

Direktwahl aus dem 3CX MyPhone mit SNOM,Tiptel oder Yealink IP Phones

November 7, 2011 - 10:14 am | 1 Kommentare

3CX Assistant allows you to quickly launch calls by double clicking on an extension or a missed call. It also integrates with Outlook to allow you to quickly dial a number in your contact list.

......Mehr »

Configuring the AlphaTech IPDP Cityline Door Phone with the 3CX Phone System

Mai 23, 2011 - 7:51 am | 0 Kommentare

Linking a Door phone to your telephone system can be useful, and this AlphaTech device is an easy-to-configure option.

......Mehr »

Fax Machines with 3CX PhoneSystem and Grandstream GXW-4004/4008/4024

April 5, 2011 - 3:56 pm | 0 Kommentare

IMPORTANT: This device has been tested for Inbound and Outbound Fax with the following firmware version: Program – 1.0.3.10; Bootloader – 1.0.0.7; Core – 1.0.0.54; Base – 1.0.0.97 3CX Support shall require use of the above …

......Mehr »

Using RelayFax as a Virtual Fax Machine with 3CX PhoneSystem

Februar 17, 2011 - 3:31 pm | 0 Kommentare

This guide has been tested for RelayFax 7.0.

......Mehr »

Dial “0″ for Operator

August 5, 2010 - 10:55 am | 0 Kommentare

Sometimes you will want to dial a phone using a number that is NOT its extension number.

......Mehr »

How to make a blind and attended transfer with Snom

Juli 7, 2010 - 1:52 pm | 0 Kommentare

In this example we will demonstrate how to perform a blind and attended (consultative) transfer using a Snom 360. We will assume that an incoming call will be received on the Snom phone which is registered to Extension 100.

......Mehr »

Analyzing a successful call setup between extensions within 3CX

März 11, 2010 - 2:12 pm | 0 Kommentare

Introduction This chapter gives you an overview of how a call is established within 3CX and how you can trace through these steps by reading the server activity log. The Server activity log can be accessed by clicking on the Server Activity Log node in the 3CX Management Console

......Mehr »

Configuring MS Exchange Server 2007/2010 Unified messaging with 3CX Phone System

März 2, 2010 - 5:13 am | 0 Kommentare

This article describes how to setup Microsoft Exchange 2007/2010 server as a Unified Messaging Server and configure 3CX Phone System to use it for voice mail and auto attendants This guide has been tested with the following components:Exchange 2007 SP1 RU8 and Exchange 2010 RTM 3CX Phone System version 8.0 and above 3CX Phone System must be installed on a separate machine. . .

......Mehr »

Media Server Modes in 3CX Phone System

Februar 4, 2010 - 11:43 am | 0 Kommentare

Introduction to the 3CX Media Server The 3CX Phone System’s main job is to connect 2 (or more) entities together for transmission of audio between them. However, there are 3 different mechanisms which can be utilized for the delivery of audio streams between 2 endpoints: Bypass Mode (Direct) Proxy Mode (Pass-Through) Transcoding Mode (Bound to Media Server) Audio streams are delivered by the 3CX Media Server

......Mehr »

Upgrading to newer versions when using Custom/International Promptsets

September 30, 2009 - 1:06 pm | 0 Kommentare

This information is relevant for installations that that are NOT using the default US prompt set. Customers that do not use the default US prompt set need to take additional steps when performing an upgrade.

......Mehr »

Switch to our mobile site