BLF: Manually Configuring a Linksys SPA 901, 921, 941, 922, 942, 962 for 3CX
In der offiziellen Anleitung steht nur wie man die Erweiterungs-Units konfiguriert.
Hier eine kleine ToDo wie man die Tasten rechts neben dem Display konfiguriert:
1. Login into your Linksys Phone in advanced mode: http: //192.168.XXX.XXX/admin/advanced
2. enter on top the "Phone" tab
3. The Kes:
Line Key 1 = dont change this settings (extension phone line)
Line Key 2-6
- Extension: Disabled
- Short Name: Mr. Smith (this will be display on the screen)
- Share Call Appearance: private
- Extended Function: fnc=sd+blf+cp;sub=123@$PROXY;ext=123@$PROXY (the value "123" represents the extension)
Quelle: https://supportforums.cisco.com/discussion/10856141/spa962-blf-konfig
Zitat:
Log in to the web administration interface.
Click Admin Login.
Click advanced.
Click the Phone tab.
Find the first line to configure (line 4 in this example):
a. From the Extension drop down list, choose Disabled.
b. From the Share Call Appearance drop-down list, choose private.
c. Enter the following string in the Extended Function field:
fnc=blf+cp;sub=Patrick@$PROXY;ext=300@$PROXY
Using the following syntax:
fnc=type;sub=stationname@$PROXY;ext=extension#@$PROXY
where:
- fnc: function
- blf: busy lamp field
- cp: call pickup
- sub: station name
- ext: extension
Click Submit All Changes. After the phone reboots, the SPA962 (in this example)
should show the following color LEDs for the monitored lines:
• Green: Available
• Red: Busy
• Red Fast Blink: Ringing
If the phone LEDs display orange or slow blinking orange, there is a problem:
Orange denotes that the phone failed to subscribe (received 4xx response) and
slow blinking orange denotes an undefined problem (there may be no response to
subscribe, or BLF).
MfG
In der offiziellen Anleitung steht nur wie man die Erweiterungs-Units konfiguriert.
Hier eine kleine ToDo wie man die Tasten rechts neben dem Display konfiguriert:
1. Login into your Linksys Phone in advanced mode: http: //192.168.XXX.XXX/admin/advanced
2. enter on top the "Phone" tab
3. The Kes:
Line Key 1 = dont change this settings (extension phone line)
Line Key 2-6
- Extension: Disabled
- Short Name: Mr. Smith (this will be display on the screen)
- Share Call Appearance: private
- Extended Function: fnc=sd+blf+cp;sub=123@$PROXY;ext=123@$PROXY (the value "123" represents the extension)
Quelle: https://supportforums.cisco.com/discussion/10856141/spa962-blf-konfig
Zitat:
Log in to the web administration interface.
Click Admin Login.
Click advanced.
Click the Phone tab.
Find the first line to configure (line 4 in this example):
a. From the Extension drop down list, choose Disabled.
b. From the Share Call Appearance drop-down list, choose private.
c. Enter the following string in the Extended Function field:
fnc=blf+cp;sub=Patrick@$PROXY;ext=300@$PROXY
Using the following syntax:
fnc=type;sub=stationname@$PROXY;ext=extension#@$PROXY
where:
- fnc: function
- blf: busy lamp field
- cp: call pickup
- sub: station name
- ext: extension
Click Submit All Changes. After the phone reboots, the SPA962 (in this example)
should show the following color LEDs for the monitored lines:
• Green: Available
• Red: Busy
• Red Fast Blink: Ringing
If the phone LEDs display orange or slow blinking orange, there is a problem:
Orange denotes that the phone failed to subscribe (received 4xx response) and
slow blinking orange denotes an undefined problem (there may be no response to
subscribe, or BLF).
MfG
