Hallo,
der Grandstream HT802 soll mit einem Toshiba MFP nur für ausgehende Faxe verwendet werden.
Problem: Dazu muss man ja "nur" die Konfig XML von der lokalen-3cx runterladen und im Grandstream einfügen, siehe Schritt 7. Die XML hat nicht viel drinstehen? Haben es von verschiedenen PCs/Browser probiert -was kann das sein?
www.3cx.com
Schritt Step 2: Add and Choose Device mit Mac-Adresse, Nebenstelle zuordnen
> haben wir erledigt.
Die XML ist jedoch fast leer:
<html>
<head><title>403 Forbidden</title></head>
<body bgcolor="white">
<center><h1>403 Forbidden</h1></center>
<hr><center>nginx</center>
</body>
</html>
Step 7: Upload the configuration to the gateway
Go to the “FXS/DECT” page in the Management Console.
Select your gateway device.
Click “Edit”
Right click the Provisioning Link and select “Save Target as”, and save it to your disk. This XML file will be the configuration file of your gateway.
Log on to the gateway via web browser, using the default username and password, as mentioned above.
Go to the “Advanced Settings” tab.
At the bottom of the page, click “Upload from local directory” from the “Upload Configuration” option.
Click “Choose File”
Navigate to the XML file you downloaded from the 3CX Management Console.
Click “Open”
Click “Upload Configuration”
During this time the gateway will apply the configuration to the gateway. When the gateway is ready, you will see the Power LED on, The WAN LED on, as well as the LEDs for the ports which you have configured. You will be able to see the normal extensions status in the “Extensions” page of the PBX. If you are using FAX Extensions, you will see the status of these in the “System Extensions” page.
der Grandstream HT802 soll mit einem Toshiba MFP nur für ausgehende Faxe verwendet werden.
Problem: Dazu muss man ja "nur" die Konfig XML von der lokalen-3cx runterladen und im Grandstream einfügen, siehe Schritt 7. Die XML hat nicht viel drinstehen? Haben es von verschiedenen PCs/Browser probiert -was kann das sein?
Configuring Grandstream HT Series FXS VoIP Gateways
This short guide takes you through the steps required to configure a Grandstream HT Series FXS Gateway with ❱ 3CX ® Phone System.
www.3cx.com
> haben wir erledigt.
Die XML ist jedoch fast leer:
<html>
<head><title>403 Forbidden</title></head>
<body bgcolor="white">
<center><h1>403 Forbidden</h1></center>
<hr><center>nginx</center>
</body>
</html>
Step 7: Upload the configuration to the gateway
Go to the “FXS/DECT” page in the Management Console.
Select your gateway device.
Click “Edit”
Right click the Provisioning Link and select “Save Target as”, and save it to your disk. This XML file will be the configuration file of your gateway.
Log on to the gateway via web browser, using the default username and password, as mentioned above.
Go to the “Advanced Settings” tab.
At the bottom of the page, click “Upload from local directory” from the “Upload Configuration” option.
Click “Choose File”
Navigate to the XML file you downloaded from the 3CX Management Console.
Click “Open”
Click “Upload Configuration”
During this time the gateway will apply the configuration to the gateway. When the gateway is ready, you will see the Power LED on, The WAN LED on, as well as the LEDs for the ports which you have configured. You will be able to see the normal extensions status in the “Extensions” page of the PBX. If you are using FAX Extensions, you will see the status of these in the “System Extensions” page.
